Ọkachamara High Precision Plastic Injection Molding Plastic Prototyping with 3D Drawings
Anyị Plastic Injection Moding Sava
Mkpebi iji mepụta:
Ka emechara nke ọma gosipụta akụkụ rọba omenala ma yie ka ọ na-erute njedebe nke ịdị njikere mmepụta, ịhọrọ ịkpụzi injection prototype ga-abụ ntụle atụmatụ. Nzọụkwụ a na-ebu ụzọ na-enye ụzọ dị mkpa maka:
Ịmata ihe ndozi: kpughee nuances imewe yana ndozi nwere ike ọ gaghị apụta ìhè n'akwụkwọ.
Mbelata ihe ize ndụ: dozie ihe ịma aka na ejighị n'aka tupu itinye aka na mmepụta nnukwu.
N'ịkwado nkenke: Meziwanye usoro mmepụta nke ọma maka izi ezi na arụmọrụ kacha mma.
N'ikpeazụ, nkà na ụzụ na-akpụzi injection abụghị nanị nzọụkwụ na njem mmepụta ihe; ọ bụ atụmatụ dị mkpa. Ọ na-enye ndị na-emepụta ihe na ndị na-emepụta ike iji ike, nleba anya, na ọnụ ahịa dị oke ọnụ, na-atọ ntọala maka mmepụta ihe na-aga nke ọma na nhazi nke ọma.
Osisi nke Injection Molding Prototyping
Ihe eji arụ ọrụ CNC
Ngwa ihe eji akpụzi injection
Ịhọrọ ihe dị mma maka ịkpụzi ịkpụzi injection
Ịhọrọ ihe kwesịrị ekwesị maka ịkpụzi ihe ntụtụ bụ mkpebi dị mkpa na usoro mmepe ngwaahịa. Nhọrọ a dabere na ihe ndị dị ka ihe achọrọ ọrụ, mgbochi mmefu ego, yana njirimara akọwapụtara nke dị mkpa maka prototype. Ndozi na ọrụ e bu n'obi, ihe ndị chọrọ ịrụ ọrụ, na ọnọdụ ndị a tụrụ anya na prototype ga-eche ihu bụ ihe kacha mkpa. Injection ịkpụzi prototyping na-enye dị iche iche n'usoro nke ihe, na-enyere ndị na-emepụta na injinia ike nka prototypes na ikwesị ntụkwasị obi na-eṅomi njirimara nke ngwaahịa ikpeazụ e bu n'obi. Na mgbakwunye, nleba anya dị ka ọnụ ahịa, oge ụzọ, na ịdị mfe nke ịrụ ọrụ ma ọ bụ imecha na-ekere òkè dị oke mkpa na nhọrọ ihe.
Thermoplastics:
Acrylonitrile Butadiene Styrene (ABS):
Njirimara: Amara maka ike na mmetụta nkwụsị.
Ngwa: A na-ejikarị eme ihe maka prototyping ngwaahịa ndị ahịa na ngwa ụgbọ ala.
Polypropylene:
Njirimara: Dị arọ, kemịkalụ na-eguzogide.
Ngwa: Kwesịrị ekwesị maka nkwakọ ngwaahịa, arịa na akụkụ ụgbọ ala.
Polyethylene:
Ụdị: HDPE (Polyethylene dị elu), LDPE (Polyethylene dị ala).
Ngwa: A na-eji ngwaahịa sitere na karama gaa na ihe egwuregwu ụmụaka.
Polycarbonate:
Njirimara: Nguzogide mmetụta dị elu, idoanya anya.
Ngwa: Ọ dị mma maka ụdị anya lensị anya, ngwa eletrọnịkị na ngwa nchekwa.
Plastics injinia:
Naịlọn (Polyamide):
Njirimara: siri ike, na-adịgide adịgide, ezigbo mgbochi iyi.
Ngwa: A na-eji ya maka ụdị ngwa ngwa, bearings na akụrụngwa nhazi.
Polyoxymethylene (POM):
A makwaara dị ka: acetal.
Njirimara: siri ike ma sie ike.
Ngwa: A na-eji ya eme ihe maka ụdị nke akụkụ igwe dị ka gia na bushings.
PEEK (Polyether Ether Ketone):
Properties: High-arụmọrụ, magburu onwe chemical iguzogide.
Ngwa: Kwesịrị ekwesị maka prototypes na gburugburu na-achọsi ike, dị ka ikuku ikuku na ahụike.
Elastomers:
Ihe mkpuchi silicone:
Njirimara: Na-agbanwe agbanwe, na-eguzogide oke okpomọkụ.
Ngwa: Ejiri ya maka ụdị ngwaọrụ ahụike, akara, na ngwaahịa ndị ahịa.
Bioplastics:
Polylactic acid (PLA):
Ngwongwo: Enwere ike imebi.
Ngwa: A na-eji ya n'ụdị omume enyi na gburugburu ebe obibi, nke a na-ahọrọkarị maka nkwakọ ngwaahịa na ngwa ahịa.
N'akụkụ nke injection ịkpụzi prototyping, nhọrọ nke ihe bụ a nuanced mkpebi na-achọ nlezianya na-echebara ma teknuzu na nke bara uru akụkụ. Ihe ọ bụla na-eweta ihe onwunwe ya pụrụ iche, na-enye aka na nkenke na ịrụ ọrụ nke prototype.
Osisi nke Injection Molding Prototyping
